$99.99
- Buy with Confidence, Get Quality
- fast shipping
- No Compromise on Quality
- Quality You Can Trust
Order to size, or buy the standard 10′ kit – YOU DECIDE!
Custom heaters can be ordered to match the length and width of your benches for continuous coverage without cold spots. The best buy we’ve found a durable, economical alternative. Agritape uses 2 copper conductors, bonded to tough, sealed mylar film. Thermostatic control gives uniform heating. Place them under growing trays or pots, or bury under beds. Grounding screen and thermostat are required for operation. Agritape Thermostat Jr. – Precise temperature control from 40 degrees – 100 degrees F. 13 amp size; two 2-prong receptacles. Controls up to 80 ft of Agritape. 110V, perfect for use with Agritape kit 1011M.
- Temperature control from 40-100 degree F
- 13 amp
- Controls up to 80ft of Agritape
- Two 2-prong receptacles
- Provides temperature control to within 1 degree F. of desired setting
- Factory Service Charge ($10.00) for Agritape orders less than $80.00.
- Not for use with GFI wiring (Ground Fault Interruption). The manufacturer says the Agritape can build up static electricity on the surface which causes the GFI to trip, (like a breaker), causing an interruption in the power flow. This is not hazardous to use, just an inconvenience, because you would need to repeatedly reset the GFI. This doesn’t happen all the time; it depends on the conditions (such as humidity)
- Manufacturer supplies a one to two-year warranty.
- Grounding Screen (Product # AGS11) and this thermostat (Product # ATJR) are required to use Agritape (Product # 11CAG)
The Agritape Root Zone Heater is a heating system made of copper conductors bonded to durable and sealed mylar film. It is placed under growing trays or pots or buried under beds to give a uniform heat to the plants’ root zone. The heater is controlled by a thermostat that provides precise temperature control within one degree F of the desired setting.
Can I order custom heaters for the Agritape Root Zone Heater?
Yes, custom heaters can be ordered to match the length and width of your benches for continuous coverage without cold spots.
What is the Agritape Thermostat Jr. and how does it work?
The Agritape Thermostat Jr. is a temperature control device that provides precise temperature control from 40-100 degree F. It has a 13-amp size and two 2-prong receptacles and can control up to 80 ft of Agritape. It works by controlling the temperature within one degree F of the desired setting.
Is the Agritape Root Zone Heater and the Agritape Thermostat Jr. safe to use with GFI wiring?
No, the Agritape Root Zone Heater and the Agritape Thermostat Jr. are not safe for use with GFI wiring. The manufacturer says that the Agritape can build up static electricity on the surface which causes the GFI to trip, like a breaker, causing an interruption in the power flow. This is not hazardous to use, just an inconvenience, because you would need to repeatedly reset the GFI. This doesn’t happen all the time; it depends on conditions such as humidity. A grounding screen and the Agritape Thermostat Jr. are required to use Agritape.
- Installation and Operating Instructions
Be the first to review “Thermostat For Agritape Root Zone Heaters Controls Up To 80 Ft.”
Related products
Greenhouse Supplies
ITML Panterra Decorative Plastic Bowl 14in Diam X 11 3/8in Height Clay Color
Greenhouse Supplies
Greenhouse Accessories
Greenhouse Supplies
TO Plastics Carrying Tray For 450 Series Pots, Case Of 50 Trays
Greenhouse Supplies
Greenhouse Supplies
Greenhouse Supplies
Greenhouse Plastic & Poly Film
Reviews
There are no reviews yet.